STRAIGHT CENTRIFUGAL PUMP - Cast Iron - 1.5 / 2" Ports - 230/460V - 210 GPM

(No reviews yet) Write a Review
$1,691.00
SKU:
PT45673

Product Overview

Free Shipping within the Lower 48 United States. If you are located outside of the Lower 48 United States, please request a freight quote.

 

Model Number: PT45673

Condition: New

Description: STRAIGHT CENTRIFUGAL PUMP - Cast Iron - 1.5 / 2" Ports - 230/460V - 210 GPM

Features: 13,680 GPH (228 GPM) - 7.5 Hp TEFC - 230/460V - 3 Phase - 22/11 Amps - 73 PSI - 168 Ft Head - 215JM Frame/Mounting Base - 2" NPT Threaded Suction Port / 1.5" NPT Threaded Discharge Port - Flooded Suction - Buna-N Mechanical Seal and O-Ring (Optional Seals Available) - 1/4" Diameter Solids Handling - Recommended for Chemical and Liquid Transfer, Heating & Cooling, Recirculation, Booster Service, Dirty Water and Other Commercial/Industrial Applications - Semi-Open Self-Cleaning Stainless Steel Impeller - Adjustable Discharge Position in 90º Increments - Vent & Drain Plugs,  - Dual Volute Design - Self-Cleaning, Semi Open Impeller - Solids Handling up to 1/4" - Made in the USA.

 

Description & Specification:

  • Industrial/Commercial Heavy Duty Straight Centrifugal Pump 
  • Our extensive line of USA made industrial/commercial centrifugal and straight centrifugal pumps are designed for continuous operation and are recommended for use for chemical and liquid transfer, heating and cooling, recirculation, booster service, dirty water and similar industrial/commercial applications
  • Features: heavy duty cast iron construction, rotatable discharge in 90º increments with vent and drain plugs for all positions, semi-open self-cleaning stainless steel impeller, Type 21 mechanical seal and o-ring casing seal, stainless steel motor shaft and hardware, optional seal wash port and hose available, pedestal versions available for 145JM, 182JM and 184JM frame models
  • Pump Type: Straight Centrifugal - Industrial/Commercial
  • Frame: 215JM
  • Motor: 7.5 Hp
  • Voltage: 230/460V
  • Phase: 3
  • Hertz: 60
  • Motor Type: TEFC
  • Amp Draw @ 230V: 22
  • Amp Draw @ 460V: 11 
  • Suction Port: 2" - NPT Threaded
  • Discharge Port: 1.5" - NPT Threaded
  • Flow: 13,680 GPH (228 GPM)
  • Rated Pressure: 73 PSI
  • Maximum Working Pressure: 150 PSI
  • Maximum Total Head: 168 Ft
  • Construction: Cast Iron (also available in Cast Stainless Steel and Cast Bronze - please inquire)
  • Impeller: Semi-Open, Self-Cleaning - Stainless Steel
  • Seal: & O-Ring: Buna-N Mechanical (Viton Mechanical Seal and O-Ring Available of Stainless Steel and Bronze Models, also Silicon Carbide Seals Available - please inquire
  • Solids Handling Capacity: 1/4"
  • Priming: Flood Suction Required 
  • Maximum Temperature: 180ºF for Models with Buna-N Seals and 200ºF for Models with Viton Seals 
  • Pedestal Versions Available for Pumps in the Series with 145JM, 182JM and 184JM Frames
  • Power Cord/Plug: N/A.  This is a hardwire pump.  We recommend a licensed and insured electrician to run power to this pump
  • Note: we carry a full line of accessories including hoses, strainers, seal kits, wheel and dolly kits and more.  Please inquire
  • Optional Item: Model PTPV-XX - Pedestal - Available for Model in this Series with 145JM, 182JM & 184JM Frames - Factory Installed - Please inquire
  • Optional Item: Model PTSWPH - Seal Wash Port & Hose - Factory Installed - Please inquire
  • Overall Dimensions: 26" L x 15" W x 12" H
  • Ship Weight: 204 Lbs
  • 1 Year Warranty - Includes Parts & Labor  
  • Made in the USA

Reviews

(No reviews yet) Write a Review