TRASH & SEWAGE PUMP Industrial - 2" Ports - 3 Hp - 230/460V - 3 Ph - 6,600 GPH

(No reviews yet) Write a Review
$2,906.96
SKU:
IF_4967AC0A

Product Overview

Free Shipping within the Lower 48 United States. If you are located outside of the Lower 48 United States, please request a freight quote.

 

Model Number: PT316A95

Condition: New

Description: TRASH & SEWAGE PUMP Industrial - 2" Ports - 3 Hp - 230/460V - 3 Ph - 6,600 GPH

Features: 6,600 GPH (110 GPM) - 2" Suction & Discharge NPT Threaded Ports - 3 Hp - 230/460V - 3 Phase - 28 PSI - Self Priming to 20 Ft - Cast Iron Construction - Silicon Carbide/Viton Mechangical Seal - Stainless Steel Semi-Open Clog Resistant Impeller - Buna-N Check Valve & O Ring - Removable Cast Iron Volute/Wearplate - Easy Cleanout Design - UL & CSA Listed - Made in the USA.

 

This Series of Sewage & Trash Pumps is Available in the Following Alternate Ranges and Configurations:

Port Sizes:             2", 3" & 4" NPT Threaded

Flow Ranges:        6,600 GPH (110 GPM) to 32,400 GPH (540 GPM)

Motor Sizes:          3, 5, 7.5, 10 and 15 Hp

Voltages:               230V, 1 Phase & 230/460V, 3 Phase

Pressure Ranges: 28 PSI to 48 PSI

Solids Handling:    1" to 2"

Alternate Configuration: This Series of Pumps is Available in Explosion Proof/Hazardous Location Configurations - Please Inquire

 

Description & Specification:

  • Industrial/Commercial Heavy Duty Trash and Sewage Pump
  • Our heavy duty USA made line of trash and sewage pumps are designed for handling solids laden liquids and slurries. This series of trash and sewage pumps is available in 2", 3" and 4" NPT threaded port sizes. The solids handling capabilities make these pumps ideally suited for a wide variety of industrial and commercial applications including: sewage treatment facilities, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pump, wood chips, process water, sludge, slime, waste water, white water and similar applications.  Designed for handling liquids containing sewage, stones, sticks, mud and other solids
  • Features: Continuous duty commercial/industrial rated motors, heavy duty cast iron construction provides abrasive resistance and durability, silicon carbide/Viton mechanical seal, stainless steel semi-open clog resistant impeller, Buna-N check valve and o ring, removable cast iron volute/wear plate, easy clean out design (3" & 4" models feature front clean out), optional mounting base available for 184 & 215 JM frames - see Optional Items below
  • For use with non-flammable liquids compatible with pump components and materials (explosion proof / hazardous location pumps available - please inquire )
  • Pump Type/Application: Sewage and Trash - Industrial/Commercial
  • Flow: 6,600 GPH (110 GPM)
  • Pressure: 28 PSI
  • Motor: 3 Hp - TEFC
  • Voltage: 230/460V
  • Phase: 3
  • Amp Draw @ 230V: 8
  • Amp Draw @ 460V: 4
  • Suction Port: 2" NPT Threaded
  • Discharge Port: 2" NPT Threaded
  • Total Feet of Head: 64
  • Priming: Self Priming to 20 Ft
  • Maximum Working Pressure: 150 PSI
  • Maximum Temperature: 180ºF
  • Solids Handling Capacity: 1"
  • Pump Construction: Cast Iron
  • Seal: Silicon Carbide/Viton Mechanical
  • Check Valve: Built-In Buna-N
  • O-Ring: Buna-N (casing seal is reusable after clean out maintenance)
  • Clean out: Pull-From-Rear Design allows clean out and repair without removing piping (3" & 4" models feature front clean out)
  • Volute/Wear Plate: Cast Iron
  • Optional Item: Model PTA20090 – Mounting Base for 184 & 215 JM Frames – Factory Installed – Please inquire 
  • Overall Dimensions: 19.9” L x 9.3" W x 8.8" H
  • Ship Weight: 87 Lbs
  • 1 Year Warranty (Includes Parts & Labor) 
  • Made in the USA

 

Reviews

(No reviews yet) Write a Review