FREE SHIPPING OFFER
|
Free Shipping within the Lower 48 United States. If you are located outside of the Lower 48 United States, please request a freight quote.
|
Model Number:
|
PTWGB887796
|
Condition:
|
New
|
Description:
|
Regenerative Blower - 3 Phase - 1 Stage - 64 CFM - 11/16 HP - 61 dB - 50/60 Hz
|
Features:
|
50 / 60 HZ Motors are standard offering a wide voltage range - Rugged Industrial Duty - made to run 24/7 and are built to last - Virtually Maintenance Free - Built in Thermal Protectors
|
Contact Us:
|
Phone (Toll Free):
|
This unit model comes in numerous specifications. If you need assistance with finding a certain specification for your application, please do not hesitate to contact us.
Description & Specification:
INLET CONNECTION INCHES: 1 1/4
PHASE: 3
HORSEPOWER: 11/16
STAGES: 1
TYPE: Regenerative Blower
DECIBELS: 64
MAX PRESSURE INCH H20: 64
MAX AIR FLOW CFM: 61
Additional Features:
Oil-Free Air - supply clean oil-free air without any contaminants unlike traditional compressors, vacuum pumps and blowers
Energy Efficient - compressors, vacuum pumps and traditional blowers typically waste energy by requiring higher pressures and flows to achieve the same results as our blowers due
Virtually Maintenance Free - fewer moving parts reduce wear and tear and allow for our blowers to last longer than typical vacuum pumps and compressors
Low Acoustical Noise Levels - run quieter (between 51-81 db's) compared to compressors, vacuum pumps and traditional blowers
Rugged Industrial Duty - our regenerative and centrifugal blowers are made to run 24/7 and are built to last
Compact - the size of our units are much more compact than compressors, vacuum pumps and traditional blowers
Lightweight & Corrosion Resistant - impellers, housings and mounting bases are made of cast aluminum alloy for reduced weight, maximum strength and corrosion resistance
50 / 60 HZ Motors are standard offering a wide voltage range Blowers are made of Cast Aluminum Alloy for reduced weight, maximum strength and corrosion resistance
Built in Thermal Protectors for overload protection are standard
Double Shielded Stainless Steel Sealed Bearings are standard
High Quality Shaft Oil Seals are standard between the impeller & bearings for protection against air contamination
Anodizing for corrosion resistance is available
Retrofit Bases & Flanges are available to match differing dimensional requirements
Motor Shaft-Mounted Impeller or Direct Drive Technology eliminates the need or use of belts, couplings and gears.
Tighter Tolerances between the impellers and housings increase flow and pressure efficiency
Shipping Terms
|
Shipping and Handling: FREE within the Lower 48 United States. All other locations, please contact us for a shipping quote.
Shipping Insurance: All of our products are shipped 100% insured against damage and loss. If you receive a damaged product, please let us know by email and we will arrange for the product to be picked up at the address that it was delivered to. We will pay shipping to have the item returned to our facility. Once we have received the item back, we will ship a replacement immediately, provided stock is available.
|
Warranty and Return Policy
|
All of our products are sold with at least a One Year Manufacturer's Warranty. If you receive an item that becomes inoperative within the manufacturer's warranty period, you will be required to exercise your warranty directly with the manufacturer for the repair or replacement of the product. We will not accept product returns which are covered by a manufacturer's warranty.
|
Feedback Policy
|
We want you to be completely satisfied with your purchase and have a pleasant buying experience with us on eBay. We highly value our outstanding eBay feedback reputation. If anything about your transaction is not to your satisfaction, please contact us BEFORE leaving feedback, inform us of the issue, and we will do our best to resolve the situation to your satisfaction in an effort to earn a positive feedback. Due to our business systems and processes, we leave feedback after receiving feedback from you, our valued customers. We believe this process ensures good communication and problem resolution in advance of posting permanent feedback.
|
|